Branch no.

Location

Service Company

Major/Minor maintenance Major/Minor maintenance Major maintenance (With blade change) Minor maintenance (Without blade change)

Maintenance Date

Serial no.

Installation Date

Technician

Signature

Display function, check for damage Display function, check for damage OK Not OK

Check flap for damage Check flap for damage OK Not OK

Check rollers for wear, fixing screws tight Check rollers for wear, fixing screws tight OK Not OK

Remove engine cover + claw covering, check connections Remove engine cover + claw covering, check connections OK Not OK

Clean, blow out / vacuum with compressed air Clean, blow out / vacuum with compressed air OK Not OK

Ease of movement, claws bent, cleaned Ease of movement, claws bent, cleaned OK Not OK

Remove dirt in gripper end position Remove dirt in gripper end position OK Not OK

Check/adjust chain tension Check/adjust chain tension OK Not OK

Function, distance to strut Function, distance to strut (must not rub/touch strut → Move to cleaning position, distance approx. 1-2 mm) OK Not OK

Coating, damage Coating, damage OK Not OK

Dismantle blade, remove any caking Dismantle blade, remove any caking (NEVER clean the strut and blade with hard/sharp objects) OK Not OK

Replace blade, guide ring and screws (5.5Nm) Replace blade, guide ring and screws (5.5Nm) OK Not OK

Last blade change on: Only with ≥20,000 loaves since the last change!!!

Check latches - front doors, upper flap Check latches - front doors, upper flap it must only be possible to open latches using a tool) OK Not OK

Safety Check function, spacing initiators Safety Check function, spacing initiators it must only be possible to open latches using a tool) OK Not OK

Remove soiling (vacuum), toothed belt tension + check/lubricate guide (only replace toothed belt as required!) Remove soiling (vacuum), toothed belt tension + check/lubricate guide (only replace toothed belt as required!) Recommended lubricant - Mobil, Mobil grease FM 222 NLGI 2 OK Not OK

Check spring force setting (force must move PB from initiator downwards) Check spring force setting (force must move PB from initiator downwards) OK Not OK

Brush / sealing lip feed-through (clean and check for damage!) Brush / sealing lip feed-through (clean and check for damage!) OK Not OK

Check toothed belt tension (replace every 2-3 years depending on the condition) Check toothed belt tension (replace every 2-3 years depending on the condition) OK Not OK

Check initiator flag fastening and distance (distance approx. 1 mm) Check initiator flag fastening and distance (distance approx. 1 mm) OK Not OK

Replace M10 screw Replace M10 screw OK Not OK

Check connections/play Check connections/play Lubricate (for machines older than 2 years) OK Not OK

Visual inspection for wear and screw fittings → Visual inspection for wear and screw fittings → OK Not OK

Keyboard/display/rear film → Check function and for damage Keyboard/display/rear film → Check function and for damage OK Not OK

Read total bread counter

Read and reset bread counter

Read and reset error memory: Read and reset error memory: OK Not OK

New Field New Field E1 E2 E3 E4 E5 E6 E7 E8 E9 E10

New Field New Field OK Not OK

Serial number: (8-digit number)

Latest software loaded (version: ___-___-___) (If a new software version is available, this must be updated)

New Field New Field OK Not OK

Latest software loaded? (Version: JM__.__.__V) (If a new software version is available, this must be updated)

New Field New Field OK Not OK

Date/time set? Date/time set? OK Not OK

Enter company logo File InputChoose FilesNo Files ChosenAccepted file types: jpg, jpeg, jpe, png, tiff, tif, webp, avif, heic, heif, heics, heifs, pdf, svg. Max. file size: 5 MB

Damage, crushing Damage, crushing OK Not OK

Cable reel / spiral cable function Cable reel / spiral cable function OK Not OK

Vacuum machine interior Vacuum machine interior OK Not OK

Trigger emergency stop Trigger emergency stop whereby the front door, downward-opening flap is opened during cutting process OK Not OK

Insertion flap interlock function Insertion flap interlock function OK Not OK

Warning sticker worn? Replace if necessary Warning sticker worn? Replace if necessary OK Not OK

Other damage:

Damage rectified? Damage rectified? OK Not OK

"Next maintenance" sticker attached (LIDL and KL) "Next maintenance" sticker attached (LIDL and KL) OK Not OK

"Last blade change" sticker attached (LIDL and KL) "Last blade change" sticker attached (LIDL and KL) OK Not OK

Electrical check carried out as per DGUV V3 (VDE 0701/0702) (enclose test report) Electrical check carried out as per DGUV V3 (VDE 0701/0702) (enclose test report) OK Not OK

"VDE check" sticker attached (only DE) "VDE check" sticker attached (only DE) → Country-specific OK Not OK

Slice thickness __,__,__ (Country-specific)

New Field New Field OK Not OK

Initial thickness (approx. slice thickness), check end piece (approx. 18-20 mm) Initial thickness (approx. slice thickness), check end piece (approx. 18-20 mm) OK Not OK

Vacuum out machine with vacuum cleaner Vacuum out machine with vacuum cleaner OK Not OK

Disinfect surfaces with disposable wipe Disinfect surfaces with disposable wipe Recommended disinfectants, e.g.: ECOLAB Sirafan Speed, JOHNSON DIVERSEY Suman Quicksan OK Not OK